Yay!

I made it through the month and managed to post every day. I think I will try to keep posting every day or two since I still have a bit of a blog backlog. One of these days I will press gang Ken into being my photographer (unless he wants to be my model instead).

Today's knitting was all about the toy. I now have two arms, a trunk, a head and two ears (not pictured). Thanks to a trip to Fabricland for some stuffing these bits actually look like body parts; for a while they looked like monochromatic deflated balloons.

I've started on the first leg. The only problem I can foresee at this point is a lack of worsted weight black yarn. I will either have to use a few strands of sock yarn held together or I will have to spin up some of my black Alpaca. Decisions, decisions.

Almost over and newly cast on

Then end of November is upon us. At this point there is no hope of the abandoned sweaters being finished (or even worked on) by the end of the month. I have also failed to post the sweater I finished some time ago but which has yet to be properly photographed. Also the hand spun sweater and the two Urchins deserve proper photos.

Some, but not all of this may be rectified tomorrow. Today I spent a little time working on my green shawl but most of my time on a new project. I bought the pattern and cast on for Vincent the Vampire. I've never knit a toy before and this one has so many charming little details.
The pattern calls for worsted weight yarn and since I have the white Faulklands that didn't get used in the sweater I'm using it. I'm pretty sure that a dig through my stash should yield a black yarn of this weight. I will have to go out and buy some stuffing, though.

So far I have the trunk knit and half of the head. This should be a reasonably quick knit. It should also be a good gift for my nephew (who I'm pretty sure doesn't read my blog). Depending on how long this takes to knit I'm tempted to make an extra sweater for the toy; vampires have casual Fridays too right?

Plugging away

I've not made much progress on my shawl today, though I did manage to snap a photo before the sun set, which was at 4:14pm according to Environment Canada. It is big enough that it is hard to really stretch it out on the circular needle. I had to settle for stretching out half of it.

Mostly I've been knitting away at the green shawl. After 9000 stitches it is 4 inches wide. It has so far used up two of the six skeins I dyed. I may end up dying another skein or two to get the width I'm looking for but I'll wait until I'm closer to the end to decide. I'll also wait until its at least half done before I bother posting a picture. It really only looks like a long green strip of knitting at the moment.

Shawl progress

A quick post after spending an enjoyable evening at the Ariadne knit night.

Today I managed to knit an inch and a half on my green shawl/blanket. Most of this progress was managed while waiting for my number to be called so I could get Quebec plates for my car. (I can't believe how few people bring something to entertain themselves in such situations. Even before I knit I would pack a book to keep myself from dying of boredom and frustration.)

I spent most of this evening working on my Cliete. I've just started the 7th repeat of the chart and looking at the available yarn I'm pretty sure there won't be 9 repeats. If I'm lucky I might get 8 repeats out of my remaining yarn. Judging by its current length that might be enough. I will probably only spin more yarn if I run out mid repeat (or mid row).

I only have a hastily taken photograph but it gives a vague sense of the length and the way the yarn is producing the occasional stripe. Tomorrow I'll be sure to grab a picture in natural light and with the shawl more stretched out.

Long rows

Today I knit a couple of gauge swatches for my green shawl/blanket. I'm usually a big fan of tight gauge so I assumed I'd be knitting on 4.5 mm needles. I found, though, that the mill spun yarn has no drape and I needed to go up to a 5 mm needle to get a fabric I like. I'm still finding it stiff but I'm hoping that a good soak in some Euclan or hair conditioner will make this yarn more relaxed.

Part of the problem , I think, is that I have gotten used to knitting with handspun which has a lot of drape. Another part of the problem is that this yarn still has some excess dye in it, as I discovered when I washed my swatches. I'm hoping that washing this dye out and adding some conditioner in will give the yarn and the fabric a nicer hand.

Now that I know my gauge (5.5 stitches/inch) I'm facing casting on some 360 stitches. This will be the sort of project that makes you go to bed before finishing one more row. My orange shawl is the same since it is now some 320 stitches wide and growing. I may have to cast on for some mittens or some socks or another hat just to have something that shows progress when I work on it.

In the mail

I always love getting mail and the last two days have been especially good to me. Yesterday I got two skeins of Blue Moon lightweight Socks that Rock (Rooster Rock colourway) in the mail. These skeins are part of my payment for knitting a pair of sample socks for Cookie A's upcoming book. If you look at the PDF my socks are the purple ones that appear on the back cover. I knit the socks back in April but I will wait to post my pictures until the book is actually out (and I know what the socks are named).

This morning the mail man delivered 8 oz of Crown Mountain Farm's Corriedale Pencil roving (Twilight colourway). I won this after donating to Trampled by Fleece. They are raising money to help pay the drug costs of a knitter and philosophy undergraduate who has Lyme disease. This roving is actually an early bird prize; the final raffle will be a t the end of this month.

Sadly I doubt any fiber or yarn will arrive in the mail tomorrow.

Finished, in progress, almost begun

The I finished the wine coloured Urchin first thing this morning and it is now blocking/drying on a dinner plate. I'm pleased with ow it came out but I feel it is missing a little something. I'm going to look for some ribbon or a button or something to jazz it up a bit.

In the meantime I'm plugging away at the shawl. I just finished the fifth repeat which means I'm 30% finished. It also means that the shawl is now more than half its final length and width. It actually looks like a shawl. This is when it pays to remember that half the length is not half the shawl. I will be knitting this for a while yet.

Since Christmas is starting to appear on the horizon, the shawl won't be my only knitting on the needles (and I'm not referring to the two sweaters that are lying abandoned). After doing some swatching with my green hand spun I realized that a) I really like how it look in garter stitch and b) I don't have enough to knit the shawl/lap blanket. My solution was to take some white and green marl yarn (dk weight) that I got at the big NDG destash and dye it to match the hand spun.

In the original version of this shawl the center was hand spun and the border was mill spun. My plan for this version is to have the center mill spun and the border hand spun. Now that I have all of the yarn dyed up and dry I should be casting on any day now.

Bulky yarn

The wine coloured Corriedale is dry. I think it qualifies as a bulky yarn. Hurray. I ended up with 134 yards and approximately 6 oz of yarn.

I cast on for another Urchin but found that all of the twist in the yarn was coming out as I knit. I ripped back and put the yarn back through the spinning wheel to give it more twist. It is no longer balanced but it is knitting up really nicely. I should have another hat by tomorrow.

Determining progress

I've spun up the wine coloured yarn and now I'm just waiting for it to dry to see how close to a bulky yarn I managed to get. In the mean time I'm knitting away at my lace shawl (and ignoring the sweaters that still need sewing up). The lace is nice and easy and repetitive so progress has been pretty fast.

The thing about shawls like this, which start out with very short rows and then get longer and longer rows, is that it is hard to tell just how much you have completed. It takes no time to add inches to the length at the start but you know it will take forever by the end. Since I like to know how far I still have to go, I broke out the basic algebra and geometry.

The shawl is a simple equilateral triangle with the base twice the length of the height. All I want is what percentage I have finished at any given point in the knitting. I could have figured it out row by row but I don't need anything that precise so I figured it out based on chart repeats. Assuming I am knitting the shawl with the suggested 9 repeats, after one repeat I'm 1% finished; after two I'm 5%; after three I'm 11%; after four I'm 20%; after five 31%; 44% after 6; 60% after 7; and 79% after 8.

I'm almost finished my fourth repeat tonight. I'll update my Ravelry progress bar.

Spinning for an Urchin

I really enjoyed knitting the Urchin pattern and I've been wearing the hat when ever I go out, so I've decided to knit another one. This time, though, I want to use yarn I've spun. The pattern calls for a super bulky yarn, maybe thick and thin, which is a good deal thicker than I have made before. So tonight I spun up some small sample skeins to decide how to proceed.

I knew I wanted to use the Louet Corriedale roving in the warm wine colourway. I also wanted to add some Fiddlesticks laceweight in a similar colour (50 % merino, 50% tussah silk).

My first sample (far left) is a thick and thin single plied with a strand of Fiddlesticks. Because I'm not used to thick and thin I think I over felted this in the finishing step fearing that it would come apart otherwise.

Moving right, my second sample is a cabled yarn. I spun a single of Corriedale and then plied it with a strand of laceweight, adding extra twist while plying. I then plied this 2 ply to itself to get a 4 ply cabled yarn. I think I added a bit too much twist but otherwise I like how this sample turned out.

My last sample is another single of Corriedale plied to a single of laceweight only this time I held the laceweight taut and let the Corriedale wrap around it as I plied. I really liked the effect but I'm not sure I could make it as thick as I need.

I finally decided that I would do a cabled yarn to get the desired thickness. I wanted more shine, though, so instead of plying a single strand of laceweight to a strand of Corriedale I decided to use two strands of lace weight. This should also help build up the thickness a bit. I've spun and plied one bobbin's worth of 3 ply. Tomorrow I will spin another such 3 ply and then ply everything together. Hopefully I'll end up with something bulky.

Pictures

It is knit night again, so I thought I'd post some quick pictures.

The green is dry and ready to be knit as soon as I decide what it is going to be. I'd like to make it into some sort of wrap but I will probably have to supplement it with some other yarn to get sufficient yardage. There is swatch knitting in my future.

Last night I cast on for the Cliete using my orange hand spun. I'm going to see how large a shawl I can get with my 680 yards of yarn. I'm making a point of not spinning the rest of this orange roving into something until I know if I will need to make myself some more lace weight to finish the shawl. It will be awhile before I get to that point.

Nothing much doing

If it weren't for NaBloPoMo I don't think I'd bother posting today. Most of the day was taken up getting my Ontario driver's license converted to a Quebec license and working to get the car licensed in Quebec. Good times.

The green hand spun is currently drying and I should have a nice picture and a good idea of its final weight tomorrow. In the meantime I've been using the Ravelry pattern search as inspiration for what to do with my hand spun. I think I will make something up for the green but I've picked out Cliete to make with my orange lace weight. It's been awhile since I knit a shawl and I'm looking forward to it.

Christmas knitting should get started any time now...

Plied

Another day of spinning and now my green yarn just needs to be over dyed.
Everything went pretty much as I predicted. I got about a bobbin and a half of singles from my roving. I skeined them on my niddy noddy and discovered that I had about 1170 yards.

So I divided this number by 2, since my niddy noddy makes 2 yard skeins, and then by 3. This gave me the number of wraps of the skein I needed to get into each ball. I put the skein on my swift and counted off the rotations of my swift as I wound the singles into center pull balls.

Finally I plied my 3 singles together and got 396 yards of finished 3 ply.

Now I just need to give my yarn a good whack or two and stick it in the microwave with a bit more blue dye.

Single focus

I've been spinning away at the yellow/green/blue BFL because I can't wait to knit with the finished result. I was originally thinking of making a baby blanket for some friends but I've changed my mind. Now I'm thinking about a nice lap blanket/shawl. It would make a great Christmas present if I can stand to part with it. It really depends what kind of yardage I end up with.

I've spun up one bobbin full and I've got enough fiber for at least another half bobbin. Once it is all spun up I will wind it off onto the niddy noddy and count my yardage. Then I will divide it into 3 equal balls and ply them together. This is what I did for the sample and I'm pleased with how it worked.

I've really fallen in love with how the hand spun knits up. It is soft and has beautiful drape and is full of character. Commercial yarns just can't compete.

I will set aside the hand spun soon, though. I've still got a couple of sweaters that are a bit of sewing and some knitted edging away from being finished. I've decided that I want to get them both done by the end of this month. We'll see how this goes.

Now back to my spinning.

Some pictures

I've got an evening of babysitting ahead of me so I'll make a quick, picture heavy post.

First a picture of the red/orange lace weight now that it is washed and dry and behaving like balanced yarn:


Next the blue BFL I dyed back in May:

And finally the blue/yellow/green mix of BFL:
(before I over dyed with more blue)


(after I over dyed)


(a swatch knit with the final result)

Spun lace weight

Today was another day without knitting. I mostly spent my time plying a bobbin of the BFL that I dyed red back in May.

I'd spun it up as fine as I could thinking I would make a 3 ply for socks or something. Since I'm having fun spinning a bit thicker at the moment, I decided to just ply this single to itself to make a lace weight 2 ply. The plying seemed to take a really long time, which made sense once I got the finished yarn off the wheel and discovered that it was about 680 yards.

When yarn has been sitting on a bobbin for a day or two you can describe it as "rested." This single had been on the bobbin for months so I think it should be described as "hibernating." I had to make a guess about how much twist to put in the ply because the single no longer really twisted up on itself. When the plying was done and I took the finished yarn off the niddy noddy it really wanted to twist up on itself in strange ways:


I have since given the skein a good soaking in hot water and a whack or two and now it is behaving like nicely balance yarn. I'm thinking of knitting myself a nice lacy stole with this. I'm so excited to be spinning yarn in yardages that allow me to knit more than simple hats and scarves.

Spinning my wheels

Today I did absolutely no knitting. This morning I tucked in the ends of yesterday's hat then washed it and blocked it on a dinner plate to stretch it out a bit (I'll have to get some modeled pictures in the next couple of days). This was as close to knitting as it got, though.

Instead I played around with my spinning wheel. First I spun the blue BFL that I dyed last May. It came out to about 170 yards of sock weight yarn. Then I spun up a sample of some BFL that I dyed blue/yellow/green a couple of days ago. The result has a bit too much contrast so I think I will try over dying with some more blue to eliminate the bright yellow and produce a more even green.

Of course a few pictures would go a long way to explaining what I mean but my camera batteries died so they will have to wait until tomorrow. Sigh. I'm going to end up having to do a post that is nothing but a collection of photos: the hat being worn, the sweater in natural daylight, the other sweater I haven't shown yet, the yarn I'm spinning... I'm going have to press gang Ken in the next few days to help me take all these photos. But first I will have to wait for my camera batteries to recharge.

A warm hat

After joking a couple of days ago about knitting a new project in a day, late this afternoon I cast on for a simple hat in bulky wool and now I have a new finished object.

Pattern: Ysolda's Urchin

Yarn: Malabrigo Aquarella. I had 2 skein in the same colourway but differnt dye lots so I alternated wedges. I'm not sure if I ended up using more than one skein total, but I do have leftovers.

Needles: 8 mm. I could easily have gone up a needle size (and technically I should have because I didn't get gauge with the 8mm) but 8mm was the largest sized needle I have.

This is a great little project. It is knit on straight needles, which I love but don't use enough, and is simple garter stitch. So pretty and so quick.

Tomorrow I'll tuck in my ends and neat up the top and then it should be ready to wear.

Fall Shawl

Since I didn't get any good pictures of my sweaters in progress, which are actually in a state better described as 'in purgatory', and I didn't cast on anything new, I'll use today's post to show off an old project.

This is a shawl that I knit as a (late) birthday present for one of my best friends. She wanted a warm shawl to curl up with at home that would cover her arms and not fall off. I thought about doing something fancy but decided that something simple would work better.

I had been thinking of spinning up yarn for this simple shawl and I had some Shetland roving that had been fighting my attempts to spin it fine and worsted. Playing around with spinning thicker, looser yarns, I ended up with about 430 yards of woolen spun Shetland. I did a little swatch to figure out how many square inches of knitting this yardage would get me and then played around with the math to decide how best to use the available square inchage.

I decided that long rows would be best for evening out my somewhat uneven yarn. This also resulted in some nice subtle striping. It is nice when things work out like that.

After I'd knit the center of the shawl I picked up along the edges and knit a garder stitch border using 2 skeins of Harrisville Designs Flax & Wool Blend. The border is much firmer and denser than the center of the shawl which causes it to really hold the shawl on your shoulders. Another happy accident.

As you can tell by the summery photograph, this shawl has been off the needles for some time. In fact I finished it before I left London, though it didn't get in the mail to my friend until I was settled in Montreal. I am really pleased with how this project came together and I was even planning on making myself a similar shawl. The Dark Welsh that makes up half my new sweater was going to be a version of this shawl. Oh well, I guess I'll just have to spin up some more yarn.

One 3 wool sweater

The sweater is all done (the ends are even all tucked in). I didn't, however, get it finished in time to take a picture in daylight. Indoor light just isn't as nice and it doesn't favour dark colours. With a little fiddling I managed to get a picture that almost captures the actual appearance of the sweater.


In the end I used up all of the two green/blue yarns but I still have a couple of small balls of the brown left over. I guess this means that I can knit a simple sweater out of a pound of fiber, more or less. This is nice to know for future projects. After knitting this I really want to knit more sweaters with hand spun. It is wonderful to knit with.

Project details:

Yarn: 4 oz each of blue/green Coopworth and dark BFL from Ariadne Knits and 8 oz Dark Welsh

Needles: 4.5mm with 3.75mm and 3.25 mm for the neckline.

Pattern: A modified version of Walker's top down raglan. I fiddled with the rate of increase at the shoulders to make more of a scoop neckline. I increased every row for about an inch and then every third row (instead of increasing every second row as the pattern instructs). If I tried this again I would not increase every row at the front and I would make the neckline deeper. Knit and learn.


Now that I'm done this sweater I'll have to find something else to blog about tomorrow. I'll have to choose between old finished objects and current unfinished. Or maybe I should start and finish something before I blog tomorrow...

Inches away

The 3 wool sweater should be finished by tomorrow. I finished the last sleeve and ripped out the ribbing at the hem and neck. I reknit the hem and then almost finished the neckline.

The sweater might even have been finished if I hadn't run out of Coopworth trying to finish off. I've solved this by ripping out the hem again. I will reknit it with fewer rows of each colour in the garder stitch. Gah.

Actually, since I'm already ripping back I think I might rip further back and add some short row shaping to the back of the sweater. I really don't like my sweaters gaping at the back and a few extra rows of reknitting are worth it to fix this problem (at least if I'm already having to rip back).

It is a good thing I estimated this would be done by Tuesday, otherwise I might feel more frustrated with all of the backtracking. Tomorrow there will be finished photos. I promise. (I really hope this is a promise I will be keeping).

Sleeve and a half

It was just as well that I blogged before dinner last night. Had I waited until I got home I would probably have technically missed posting every day. I'm posting early again today in part because I managed to snag a picture before the daylight disappeared and in part because dinner plans are once again threatening my late night posts.

This morning I finished one sleeve (with inches of the Coopworth and BFL left over) and now I'm about half done the second sleeve. You may notice that I used corrugated ribbing at the neckline and hemline. I decided that I'm not crazy about this in part because it seems to be curling. I could probably fix the curling by ripping out my cast off row and redoing it with a smaller needle but I think I will just rip it entirely.

The sleeve I finished using garter stitch and I'm much happier with how that worked out. So the plan is now to finish the second sleeve and then go back and redo the neckline and hemline to match the sleeves. such are the joys of designing on the fly.

The reason I wanted to do corregated ribbing in the first place was that I liked how the two blue/green yarns blended into each other in the swatch. Since I needed to have a stripe of brown between them in the body of the sweater I wanted to at least put them next to each other for the edgings. The corrugated ribbing just didn't fit this sweater though. I'm still putting them next to each other since I have made the garter stitch progress from a brown stripe to BFL stripe and finally to a Coopworth stripe.

And now back to knitting.

Very quick post

We've been invited out to dinner so I'll post quickly now in case I don't have a chance later. The left sleeve is all but done on the sweater and it looks like I will have yarn to spare. Not a lot of yarn to spare but enough that I won't have to arrange my edgings just to fit the left over yarn. The way things are going I should have a new sweater to wear by Tuesday at the latest.

Pictures to follow (maybe later tonight).

Splitting for the arms

This sweater is just flying off the needles. By the end of knit night yesterday it was more or less the length I was looking for. I added another stripe just to be sure and then put on a fancy ribbing. I also picked up and knit the neck band because I wanted to have the whole body done before I split the yarn for the sleeves.

So tonight a wound the yarn back onto my niddy noddy and learned that I have 96 yards of Coopworth, 86 yards of BFL, and 216 yards of Dark Welsh left. I split each type of yarn into two equal balls and I can now start on the sleeves. I'm really not sure what length of sleeve this yardage will get me. Oh the excitement of a mystery.

Trying the sweater on I find it a bit loose. Comparing it to my Tangled Yoke, which I like the fit of, I find it is just about right. Part of the difference is that the hand spun has way more drape. I think another part of the difference is that sweaters in progress never fit like finished sweaters. One of the benefits of knitting top down is that it is easy to try on as you go. One of the downsides is that trying on as you go only gives you a general sense of how well it fits. This can lead to a lot of second guessing and thoughts of ripping back.

I am going to persevere and knit the sleeves before I decide if the body is too long. The way this sweater is going it should only be a couple of days before I know if I need to rip back. Hurray for quick projects.

Off to knit night

Since my evening will be consumed by coffee and chatting with other knitters, I'm actually posting during the day. I've added a couple more stripes to the body of the sweater and I'm sure I'll add a few more by the end of the day. This is not the most portable project to take to a knit night but I can't imagine working on something else tonight.

It will be nice to be working on something other than socks at a Montreal knitting get together. Last time I went I actually cast on a new pair of simple socks since I only had sweaters that needed sewing on the go. (Yes those sweaters still need to be sewed up and finished. Just as soon as I'm finished this sweater... and maybe all of my Christmas knitting.)

I have to say that I am very grateful for welcoming knitting groups. It is so nice to have an easy way to get out and meet people in a new city. Montreal has several knitting groups that meet about once every two weeks. So far I have been to the NDG knitting night (it is the closest to me) and the Plateau knitting night. There is also a Sunday downtown knitting night that I'd like to go to and one at Ariadne knits. It is nice to have so much choice; if you want to go out knitting on any given week there is somewhere to go.

So hurray for knit nights and hurray for Ravelry which makes finding them easy.

3 wool sweater

I really need to stop posting at night if I want to take nice pictures of my darker projects. After playing around with flashes and various sources of indoor light I think I have managed to capture the colours. Actual daylight would have been easier.

I'm knitting this sweater from the top just like the last sweater. I've modified the neckline, though, so that it is scoop necked. My favorite sweaters have scoop necks so I decided that was the way to go. I used the Autumn Rose's neckline as a rough guide and from some preliminary fittings I think it will work. It is hard to tell, though, when the needles are still in the thing and the neckband is absent.

I think I will have enough yarn, but I'm really glad to be knitting from the top. When I get the sweater as long as I want I plan to device my balls of yarn evenly and knit the sleeves until I run out of yarn or they hit my wrists. I can live with 3/4 sleeves if it turns out I'm short. Based on how much yarn I used for my Fonn I'm pretty sure I will have enough for full sleeves.

If this all works out then I will know that I can get a simple sweater out of a pound of fiber. Sweaters may actually become cheaper to spin and knit than to buy. At least if I am making them for myself and don't need to take production time into account.

Now it's finished

The sweater is official done. All of the ends are tucked it and it only need to dry before it can be worn. Hurrah.

Details:

Yarn: Knit Picks Swish Superwash. 7 skeins of Truffle and 6 of Fired Brick.

Needles: Mostly knit on a 4.5 mm circular and 4.5 mm DPNs for the sleeves. The cuffs and bottom ribbing are knit using size 3.75 mm needles, and the neckband was knit using 4.5 mm, 3.75 mm and 3.5 mm needles.

Pattern: This is a version of Barbara Walker's Top-down Raglan sweater. It is heavily influenced by Brooklyn Tweed's version. About the only differences are that my sweater uses a slightly different red and is longer and less wide.

This is the first sweater I have knit for someone else. I wanted to make Ken a sweater and having shown him several different patterns he chose this one. Brooklyn Tweed's stuff is always so nicely knit and beautifully photographed that it is really no surprise that anyone should want a copy of it.

The sleeves were the only real tricky part of knitting this. It took several rips and reknits to get a nice even rate of decrease. Looking at it off the needles and on the recipient I think next time I would decrease faster at the top of the sleeve and leave the bottom a bit wider. Knit and learn.

Tomorrow I will probably show off the handspun sweater that I started as soon as this sweater was off the needles.

Endless End

I always forget just how long it takes to get a sweater off the needles. Last night I was sure that I would have this sweater done sometime this morning. But then there was some ripping out and reknitting to get the cuffs the right length and look. Then picking up and knitting the neck sucked up a bunch of time.

So now I just need to finish up the bottom so that it matches the rest. Then there's the tucking in of ends. So much for finishing in the morning; it is a good thing I wasn't tempted to try to finish up before going to bed last night. It doesn't look like it will be finished tonight before I go to bed.

Tomorrow I'll finish it for sure and have a chance to wash and block it. I'm keeping my fingers crossed that the super wash wool doesn't make it stretch out too much. I did knit a swatch and wash it but the weight of the whole sweater will probably make it inaccurate. At least this sweater is knit from the top so if it gets too long it is easier to rip out and adjust. Needless to say I'd still rather not have to rip anything out.

I'll post pictures tomorrow when its finished and there's decent light.

6 random things

Last Thursday OzB tagged me to do the 6 random things meme. Since I used up many of my current pictures in my last post, it seemed like a good idea to do the picture-less post today.

The rules:

Link to the person who tagged you [check]. Post the following rules on your blog [check]. Write six random things about yourself [check]. Tag six people at the end of your post [skipped]. Let each person know he or she has been tagged. Let the tagger know when your entry is up [I'm sure she'll spot this].

Random Facts About Me:

1. I have a pet snake named Slithergadee (from a Shel Silverstein poem). She is currently pretty active because she is trying to pick out the perfect spot to hibernate (and probably looking for some fellow snake to spend the winter with). I know that she is a she because most springs she lays a bunch of unfertilized eggs. [edited to change 'fertilized' to 'unfertilized'. Wishful thinking got the better of my typing I guess.]

2. I spent the summer of 2003 looking for Meteorites as part of the Prairie Meteorite Search. Thanks to this I have handled a variety of meteorites and know that most meteorites are magnetic.

3. I learned to crochet well before I learned to knit. I was 12 or 13 when I started to crochet hats. I was 25 when I asked my mother to teach me to knit so that I could make a baby blanket for the best friend of one of my brothers. I have never followed a written crochet pattern, though.

4. I love making (and eating) rice flour waffles. They are lighter than their wheat flour counterparts and there is really no danger of over stirring the batter. A waffle iron was one of the first things I bought for my kitchen when I moved away from home. The best waffles have toasted pecans in the batter and are served with real maple syrup. Mmmm. Now I'm hungry for waffles.

5. I love writing with fountain pens. Since high school I've primarily written with a fountain pen. I only really use a ball point when I have to fill out a form that uses carbon copies. My current pen is a black Lamy Safari with an extra fine nib. I had an identical red Lamy but I lost it (the black pen is its replacement).

6. I started my undergraduate program in Pre-med because I was interested in becoming a forensic pathologist. I didn't enjoy doing all the first year science courses all at once, though, so I switched to a double degree in philosophy and mathematics with a minor in classics.

I don't know who to pass this on to so I will skip the tagging of 6 others.

The way things are going I should have a finished, or almost so, sweater to show off tomorrow. I really want to cast on for my hand spun sweater which has motivated me to finish the one already on the needles (though not the two which need to be sewn up).

NaBloPoMo 2

It's November and I want to get back into the habit of blogging so I've decided to do NaBloPoMo again. I think this should actually make me write about all of the projects I'm working on or have finished since this summer. Hurray for motivation!

I was going to start with the random 5 meme that OzB tagged me for but I think I will leave that until tomorrow. Tonight I'm obsessed with the idea of knitting myself a sweater out of my own handspun. That I knit a swatch, washed it and am now waiting for it to dry is one of the only reasons I haven't cast on already.

It all started back in September while I was trying to get a sense of my new neighbourhood. I discovered that Ariadne Knits was within walking distance and that it advertised some spinning supplies. I picked out a 4 oz braid of dark BFL dyed with blues and greens. As I was spinning it up I decided that it would be nice as part of an argyle sweater.

I went back to Ariadne and got another 4 oz braid of Coopworth dyed in the same blues and greens. Because it was a white fleece the colours were much clearer and I hoped that they would make the colours in the dark fleece show up a bit more.

I then spun some of the 2 lbs of Falkland wool that I bought some time ago from Hello Yarn.

The yarns then sat around for several weeks while I debated whether I really wanted to knit an argyle vest or whether I wanted to go with something simpler like stripes. Then the other day I happened to move things around and ended up setting the dark BFL next to some Dark Welsh that I spun up on a whim while trying to spin loosely. The yarns looked so good together that I decided that the Dark Welsh needed to be part of whatever I knit up.

So today I finally took pictures of all this yarn and decided that I have enough for a sweater instead of just a vest. I knit up a swatch using 3 different needle sizes and a variety of stripes. Although I spun the white Falkland especially for this project I think I will leave it out. Looking at the swatch I think the 3 darker wools look really good together but the white just doesn't fit. I have about 590 yards of Dark Welsh, 290 yards of the blue/green BFL and 290 yards of the blue/green Coopworth; all three yarns are somewhere between a DK and a Worsted weight. I think I will alternate Dark Welsh stripes with blue/green stripes.

I really hope that I have enough yarn to complete this project because I don't think I can easily get more of any of it.